Pneumatic Hammer Code: HAMMER60

Pneumatic hammers’ oiling system is made automatic by making a connection with check valve in oil store. as soon as the machine starts oiling, it starts automatically and continues till the stop

  • Its body is produced by st-37 sheet metal ( ERDEMİR A-1 quality low carbon)
  • After the welding construction, its body is deposed to 650 C/h for increasing resistance
  • Compressor and hammer cyclinder was made by GG.26 special composited material and its body is added 8,8 steel screws
  • Anvil and hammer parts made hardened and crystallized
  • The table of anvil and hammer pistons can turn 8 different directions that help you work in different conditions
  • Anvil and Hammer position can be turn for 8 differrent direction for easy operation.
  • Stabil Forging with Valf settings
  • Automatic oil system
  • Control pedal can be set for user length
  • 360° mika projecting roof
  • Steel or wooden bottom table(Opsiyonel)
  • CE for European Union Security Conditions


1) Mechanic parts and roller bearings are oiled and should be controlled per 3 months
2) It should be pumped grease oil that is kept in pistons 2-3 times in a week
3)The oil tank must be controlled before any operation and the missing oil should be added.
4)Machines are under warranty for 1 year in terms of materials and labour.


Technial Spesifications Hammer 50 Hammer 60 Hammer 75
Working System Pneumatic Pneumatic Pneumatic
Normal Falling Weight 50 Kgs 60 Kgs 75 Kgs
Forging Times in a Minute 240 220 210
Max Strok 185 mm 220 mm 220 mm
Motor Power 4 kw 7,5 kw 7,5 kw
Motor Cycle (cycle-minute) 1450 1450 1450
Mold Area 150 x 78 mm 150 x 78 mm 150 x 78 mm
Weight 1300 Kgs 1550 Kgs 1950 Kgs
Anvil Weight 300 Kgs 355 Kgs 430 Kgs
Width (A) 706 mm 741 mm 780 mm
Length (B) 1585 mm 1700 mm 1850 mm
Height (C) 1405 mm 1640 mm 1680 mm


hammer6010956559_957428474282496_570812737_o10918369_948672308491446_1769968016_o2015-02-15 09.02.142015-02-13 17.58.322015-02-02 11.11.45