ROLLFORM LINE

SCOPE: Facility consists of the following main items:

1. Coil opener (Double Sided)

2. Roll-Form Unit

2.1. Guide Unit,

2.2. Forming Unit (Roll-Form),

2.3. Rectifier unit,

3. Dynamic Breakers Unit

4. Stacking Unit 5. Electronic Control Panel

1. Coil opener (Double Sided)

• Maximum speed of 40 d / min.

• Maximum roll width 255 mm

• the range of 470-520 mm mandrel opening-closing

Will be done manually by • Roll-up process

• The system will have on the mechanical braking systems

Maximum loading capacity of the car • Roll 2 x 1.5 tons

• More time to cut without losing the possibility to move

• Coil loading arms available for the installation of the second group of rollers ensures that remain idled.

1. Roll-Form Unit

1.1. Unit Guide

• Roll hair will help move the machine axis

• Steel rollers will not move on

• a guide pulleys on the side guide to action as well as the width can be set manually

2.2. Forming Unit (Roll-Form)

• be made of Miller ?1050

• Pulleys are manufactured from 4140 steel, specially hardened

• 42-48 RC hardness of Pulleys

• Beds will be 40

• The system is driven reducer

2.2. Rectifier unit

• Shaped to provide the hair up and since it can be done is the purpose of four-way set

• Manual control is

2. Dynamic Breakers Unit

• Saw Cutting 400?3?40 would help

• Pneumatic pressure group is done through 1 prömatik cylinder

• Saw action in back of the engine braking is provided, so that the speed can be adjusted

2. Stacking Unit

• act on the pulley machine and the plate will be opened and the stack pulley and the pneumatic unit will fall over

• goods produced and the first tank unit to Istif and packaging for field

2. Eletronik Control Panel

• changes in the system will be made of electronic means (tolerance ± 15 mm)

• Control panel will be the piano

• System P.L.C. control is